On Mon, 11 Dec 2023 at 19:24, Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote: > > While convering the binding to new format, serdes address specified in the > old binding was used as the base address. This causes a boot hang as the > driver tries to access memory region outside of the specified address. Fix > it! > > Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > Cc: stable@xxxxxxxxxxxxxxx # 6.6 > Fixes: bb56cff4ac03 ("ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings") > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > --- > arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi > index 2aa5089a8513..a88f186fcf03 100644 > --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi > +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi > @@ -436,9 +436,9 @@ pcie_ep: pcie-ep@1c00000 { > status = "disabled"; > }; > > - pcie_phy: phy@1c07000 { > + pcie_phy: phy@1c06000 { > compatible = "qcom,sdx55-qmp-pcie-phy"; > - reg = <0x01c07000 0x2000>; > + reg = <0x01c06000 0x2000>; > #address-cells = <1>; > #size-cells = <1>; > ranges; > -- > 2.25.1 > -- With best wishes Dmitry