While convering the binding to new format, serdes address specified in the old binding was used as the base address. This causes a boot hang as the driver tries to access memory region outside of the specified address. Fix it! Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx # 6.6 Fixes: bb56cff4ac03 ("ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index 2aa5089a8513..a88f186fcf03 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -436,9 +436,9 @@ pcie_ep: pcie-ep@1c00000 { status = "disabled"; }; - pcie_phy: phy@1c07000 { + pcie_phy: phy@1c06000 { compatible = "qcom,sdx55-qmp-pcie-phy"; - reg = <0x01c07000 0x2000>; + reg = <0x01c06000 0x2000>; #address-cells = <1>; #size-cells = <1>; ranges; -- 2.25.1