Some boards come with local-mac-address property. Allow it, and mac-address as well, to fix dtbs_check warnings like: apple/t8103-j456.dtb: network@0,0: Unevaluated properties are not allowed ('local-mac-address' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index 4aa521f1be8c..4c8a7950c83e 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -67,6 +67,9 @@ properties: description: Name for the OOB IRQ, this must be set to "host-wake". const: host-wake + local-mac-address: true + mac-address: true + brcm,drive-strength: $ref: /schemas/types.yaml#/definitions/uint32 description: Drive strength used for the SDIO pins on the device in mA. @@ -148,6 +151,8 @@ examples: interrupt-parent = <&gpio>; interrupts = <24 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "host-wake"; + /* To be filled by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>; brcm,ccode-map = "JP-JP-78", "US-Q2-86"; }; -- 2.34.1