On 02/12/2023 08:54, Tony Lindgren wrote: > From: Michael Walle <mwalle@xxxxxxxxxx> > > For a normal operation, the vdd supplies nor the stby GPIO is needed. > There are boards, where these voltages are statically enabled during > board power-up. This means supply is still required. > > The reset pin is required because once the PPI (PHY protocol interface) > is started, it can only be stopped by asserting the reset pin. > > Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > --- Best regards, Krzysztof