Re: [PATCH v4 06/11] leds: aw200xx: add delay after software reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Lee,

Thank you for the detailed review!

Please find my answer below.

On Thu, Nov 23, 2023 at 04:38:16PM +0000, Lee Jones wrote:
> On Tue, 21 Nov 2023, Dmitry Rokosov wrote:
> 
> > From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
> > 
> > According to datasheets of aw200xx devices software reset takes at
> > least 1ms so add delay after reset before issuing commands to device.
> 
> Are you able to use an auto-correct tool to sharpen the grammar a little?
> 
> > Signed-off-by: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
> > Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > ---
> >  drivers/leds/leds-aw200xx.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
> > index 4bce5e7381c0..bb17e48b3e2a 100644
> > --- a/drivers/leds/leds-aw200xx.c
> > +++ b/drivers/leds/leds-aw200xx.c
> > @@ -321,6 +321,9 @@ static int aw200xx_chip_reset(const struct aw200xx *const chip)
> >  	if (ret)
> >  		return ret;
> >  
> > +	/* according to datasheet software reset takes at least 1ms */
> 
> Please start sentences with an uppercase char.
> 
> "According to the datasheet, software resets take at least 1ms"
>               ^                            ^     ^
> 

Here it's only one 'software reset' mentioned.

> > +	fsleep(1000);
> > +
> >  	regcache_mark_dirty(chip->regmap);
> >  	return regmap_write(chip->regmap, AW200XX_REG_FCD, AW200XX_FCD_CLEAR);
> >  }
> > -- 
> > 2.36.0
> > 
> 
> -- 
> Lee Jones [李琼斯]

-- 
Thank you,
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux