Re: [PATCH 4/9] net: mdio: ipq4019: configure CMN PLL clock for ipq5332

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 11/15/23 04:25, Luo Jie wrote:
> The reference clock of CMN PLL block is selectable, the internal
> 48MHZ is used by default.
>
> The output clock of CMN PLL block is for providing the clock
> source of ethernet device(such as qca8084), there are 1 X 25MHZ
> and 3 x 50MHZ output clocks available.
>
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> ---
>   drivers/net/mdio/mdio-ipq4019.c | 81 ++++++++++++++++++++++++++++++++-
>   1 file changed, 80 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c
> index 93ae4684de31..ca9cda98d1f8 100644
> --- a/drivers/net/mdio/mdio-ipq4019.c
> +++ b/drivers/net/mdio/mdio-ipq4019.c
> @@ -43,6 +43,13 @@
>   /* Maximum SOC PCS(uniphy) number on IPQ platform */
>   #define ETH_LDO_RDY_CNT				3
>   
> +#define CMN_PLL_REFERENCE_CLOCK			0x784
> +#define CMN_PLL_REFCLK_INDEX			GENMASK(3, 0)
> +#define CMN_PLL_REFCLK_EXTERNAL			BIT(9)
> +
> +#define CMN_PLL_POWER_ON_AND_RESET		0x780
> +#define CMN_ANA_EN_SW_RSTN			BIT(6)
> +
>   enum mdio_clk_id {
>   	MDIO_CLK_MDIO_AHB,
>   	MDIO_CLK_UNIPHY0_AHB,
> @@ -54,6 +61,7 @@ enum mdio_clk_id {
>   
>   struct ipq4019_mdio_data {
>   	void __iomem *membase;
> +	void __iomem *cmn_membase;
>   	void __iomem *eth_ldo_rdy[ETH_LDO_RDY_CNT];
>   	struct clk *clk[MDIO_CLK_CNT];
>   	struct gpio_descs *reset_gpios;
> @@ -227,12 +235,73 @@ static int ipq4019_mdio_write_c22(struct mii_bus *bus, int mii_id, int regnum,
>   	return 0;
>   }
>   
> +/* For the CMN PLL block, the reference clock can be configured according to
> + * the device tree property "cmn_ref_clk", the internal 48MHZ is used by default
> + * on the ipq533 platform.
> + *
> + * The output clock of CMN PLL block is provided to the MDIO slave devices,
> + * threre are 4 CMN PLL output clocks (1x25MHZ + 3x50MHZ) enabled by default.
> + *
> + * such as the output 50M clock for the qca8084 PHY.
> + */
> +static void ipq_cmn_clock_config(struct mii_bus *bus)
> +{
> +	u32 reg_val;
> +	const char *cmn_ref_clk;
> +	struct ipq4019_mdio_data *priv = bus->priv;
> +
> +	if (priv && priv->cmn_membase) {
> +		reg_val = readl(priv->cmn_membase + CMN_PLL_REFERENCE_CLOCK);
> +		reg_val &= ~(CMN_PLL_REFCLK_EXTERNAL | CMN_PLL_REFCLK_INDEX);
> +
> +		/* Select reference clock source */
> +		cmn_ref_clk = of_get_property(bus->parent->of_node, "cmn_ref_clk", NULL);
> +		if (!cmn_ref_clk) {
> +			/* Internal 48MHZ selected by default */
> +			reg_val |= FIELD_PREP(CMN_PLL_REFCLK_INDEX, 7);
> +		} else {
> +			if (!strcmp(cmn_ref_clk, "external_25MHz"))
As pointed out by others, such string properties won't go through

Konrad