Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX and TX. Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts index 3aca0a433a00..6a9b384c4e08 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts @@ -24,6 +24,33 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -456,8 +483,38 @@ clock-frequency = <32000>; }; +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { -- 2.17.1