Add sm8550-aim300 board support, and enable serial, UFS, USB, PCIe, audio, LEDs, PMIC Volume, Power buttons, sound card and bluetooth functions support on this board. Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx> --- Tengfei Fan (16): dt-bindings: arm: qcom: add SM8550 AIM300 dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm8550-pdc arm64: dts: qcom: sm8550: update Soundwire node name arm64: dts: qcom: sm8550: remove address/size-cells from pwm arm64: dts: qcom: sm8550: remove address/size-cells from mdss_dsi1 arm64: dts: qcom: sm8550-aim300: add SM8550 AIM300 arm64: dts: qcom: sm8550-aim300: add PCIe0 arm64: dts: qcom: sm8550-aim300: add WCD9385 audio-codec arm64: dts: qcom: sm8550-aim300: add flash LEDs arm64: dts: qcom: sm8550-aim300: add display and panel arm64: dts: qcom: sm8550-aim300: add notification RGB LED arm64: dts: qcom: sm8550-aim300: enable PMIC Volume and Power buttons arm64: dts: qcom: sm8550-aim300: add WSA8845 speakers arm64: dts: qcom: sm8550-aim300: add sound card arm64: dts: qcom: sm8550-aim300: add pmic glink port/endpoints arm64: dts: qcom: sm8550-aim300: add bluetooth support .../devicetree/bindings/arm/qcom.yaml | 1 + .../interrupt-controller/qcom,pdc.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm8550.dtsi | 2 - arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 995 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8550.dtsi | 11 +- 6 files changed, 1002 insertions(+), 9 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sm8550-aim300.dts base-commit: eff99d8edbed7918317331ebd1e365d8e955d65e -- 2.17.1
