> + phy-reset-gpio:
> + minItems: 1
> + maxItems: 3
> + description:
> + GPIO used to reset the PHY, each GPIO is for resetting the connected
> + ethernet PHY device.
This is a PHY property, so should be in the PHY node. phylib should
then take care of fit.
> +
> + phyaddr-fixup:
> + description: Register address for programing MDIO address of PHY devices
Please give a better description of this and the next two properties.
> +
> + pcsaddr-fixup:
> + description: Register address for programing MDIO address of PCS devices
> +
> + mdio-clk-fixup:
> + description: The initialization clocks to be configured
> +
> + fixup:
> + description: The MDIO address of PHY/PCS device to be programed
> + clocks:
> + items:
> + - description: MDIO clock source frequency fixed to 100MHZ
> + - description: UNIPHY0 AHB clock source frequency fixed to 100MHZ
> + - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ
> + - description: UNIPHY1 AHB clock source frequency fixed to 100MHZ
> + - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ
The clock frequencies is not relevent here, the driver sets that up.
Andrew
