Beomho, On Fri, 2015-01-09 at 17:45 +0900, Beomho Seo wrote: > This patchset adds driver for Richtek rt5033 chip The chip contains > switching charge mode Li-Ion/Li-Polymer battery charger, fuelgauge. > Additionally, This includes document for device tree of RT5033 device. > > RT5033 core driver is applied by Lee Jones. > RT5033 regulator driver have been merged by Mark Brown. commit is below, > > commit b1917578fd5d8efa67afa05a0d6d7e323f2802da > > Changes in v2: > - Revise binding documentation.. > > Beomho Seo (3): > power: rt5033_battery: Add RT5033 Fuel gauge device driver > power: rt5033_charger: Add RT5033 charger device driver > Documentation: Add documentation for rt5033 multifunction device > > Documentation/devicetree/bindings/mfd/rt5033.txt | 101 ++++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/power/Kconfig | 16 + > drivers/power/Makefile | 2 + > drivers/power/rt5033_battery.c | 177 +++++++ > drivers/power/rt5033_charger.c | 485 ++++++++++++++++++++ > 6 files changed, 782 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt > create mode 100644 drivers/power/rt5033_battery.c > create mode 100644 drivers/power/rt5033_charger.c This series adds two drivers that depend on MFD_RT5033. But there's currently no Kconfig symbol MFD_RT5033. The regulator driver mentioned above is another driver that depends on MFD_RT5033. It was included first in next-20141117. It is also included in mainline since v3.19-rc1. That regulator driver has never been buildable, even if one bypasses its dependency on MFD_RT5033. That is because it includes two headers that are not yet part of the tree (linux/mfd/rt5033.h and linux/mfd/rt5033-private.h). When is the Kconfig symbol MFD_RT5033 expected to be included in the tree? Paul Bolle -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
