Re: [PATCH v2 0/3] power: rt5033: Add Richtek RT533 drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




[s/lee.jone@xxxxxxxxxx/lee.jones@xxxxxxxxxx]

On Mon, 2015-01-12 at 11:40 +0100, Paul Bolle wrote:
> Beomho,
> 
> On Fri, 2015-01-09 at 17:45 +0900, Beomho Seo wrote:
> > This patchset adds driver for Richtek rt5033 chip The chip contains
> > switching charge mode Li-Ion/Li-Polymer battery charger, fuelgauge.
> > Additionally, This includes document for device tree of RT5033 device.
> > 
> > RT5033 core driver is applied by Lee Jones.
> > RT5033 regulator driver have been merged by Mark Brown. commit is below,
> > 
> > commit b1917578fd5d8efa67afa05a0d6d7e323f2802da
> > 
> > Changes in v2:
> > - Revise binding documentation..
> >  
> > Beomho Seo (3):
> >   power: rt5033_battery: Add RT5033 Fuel gauge device driver
> >   power: rt5033_charger: Add RT5033 charger device driver
> >   Documentation: Add documentation for rt5033 multifunction device
> > 
> >  Documentation/devicetree/bindings/mfd/rt5033.txt   |  101 ++++
> >  .../devicetree/bindings/vendor-prefixes.txt        |    1 +
> >  drivers/power/Kconfig                              |   16 +
> >  drivers/power/Makefile                             |    2 +
> >  drivers/power/rt5033_battery.c                     |  177 +++++++
> >  drivers/power/rt5033_charger.c                     |  485 ++++++++++++++++++++
> >  6 files changed, 782 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
> >  create mode 100644 drivers/power/rt5033_battery.c
> >  create mode 100644 drivers/power/rt5033_charger.c
> 
> This series adds two drivers that depend on MFD_RT5033. But there's
> currently no Kconfig symbol MFD_RT5033.
> 
> The regulator driver mentioned above is another driver that depends on
> MFD_RT5033. It was included first in next-20141117. It is also included
> in mainline since v3.19-rc1. That regulator driver has never been
> buildable, even if one bypasses its dependency on MFD_RT5033. That is
> because it includes two headers that are not yet part of the tree
> (linux/mfd/rt5033.h and linux/mfd/rt5033-private.h).
> 
> When is the Kconfig symbol MFD_RT5033 expected to be included in the
> tree?
> 
> 
> Paul Bolle


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux