Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 







While I do so, since there are no qusb2 targets present on femto phy's, do
you suggest we still add them to port structure in dwc3-qcom ? I am inclined
to add it because it would make implementation look cleaner w.r.t code and
also spurious interrupts are not getting triggered (which was my primary
concern as it was never tested).

Yes, that's what I've been suggesting all along. It's a per-port
interrupt so that's where it belongs.

We should still try to determine when each interrupt should be enabled
and how best to implement that (hence all my questions).

For example, if there is no use for hs interrupts on SoCs using femto
PHYs we should fix the bindings. If we can use dp/dm on SoCs using QUSB2
PHYs, we should probably just ignore the hs interrupt when all three are
defined (especially since that functionality has never worked anyway).


Sure. Will finalise this once I get the complete info (why do we have dp/dm on qusb targets)

And apologies, I mentioned "qusb2 targets on femto phy's".
It was supposed to be "hs_phy_irq's on femto phy targets", but I think you got the gist of my question. Thanks for the response.

Regards,
Krishna,




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux