MediaTek's USXGMII can be found in the MT7988 SoC. We need to access it in order to configure and monitor the Ethernet SerDes link in USXGMII, 10GBase-R and 5GBase-R mode. By including a wrapped legacy 1000Base-X/2500Base-X/Cisco SGMII LynxI PCS as well, those interface modes are also available. Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> --- .../bindings/net/pcs/mediatek,usxgmii.yaml | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml new file mode 100644 index 0000000000000..199cf47859e31 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/mediatek,usxgmii.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USXGMII PCS + +maintainers: + - Daniel Golle <daniel@xxxxxxxxxxxxxx> + +description: + The MediaTek USXGMII PCS provides physical link control and status + for USXGMII, 10GBase-R and 5GBase-R links on the SerDes interfaces + provided by the PEXTP PHY. + In order to also support legacy 2500Base-X, 1000Base-X and Cisco + SGMII an existing mediatek,*-sgmiisys LynxI PCS is wrapped to + provide those interfaces modes on the same SerDes interfaces shared + with the USXGMII PCS. + +properties: + $nodename: + pattern: "^pcs@[0-9a-f]+$" + + compatible: + const: mediatek,mt7988-usxgmiisys + + reg: + maxItems: 1 + + clocks: + items: + - description: USXGMII top-level clock + - description: SGMII top-level clock + - description: SGMII subsystem TX clock + - description: SGMII subsystem RX clock + - description: XFI PLL clock + + clock-names: + items: + - const: usxgmii + - const: sgmii_sel + - const: sgmii_tx + - const: sgmii_rx + - const: xfi_pll + + phys: + items: + - description: PEXTP SerDes PHY + + mediatek,sgmiisys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node of the corresponding SGMII LynxI PCS. + + resets: + items: + - description: XFI reset + - description: SGMII reset + + reset-names: + items: + - const: xfi + - const: sgmii + + "#pcs-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - phys + - mediatek,sgmiisys + - resets + - reset-names + - "#pcs-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mediatek,mt7988-clk.h> + #include <dt-bindings/reset/mediatek,mt7988-resets.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + usxgmiisys0: pcs@10080000 { + compatible = "mediatek,mt7988-usxgmiisys"; + reg = <0 0x10080000 0 0x1000>; + clocks = <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>, + <&topckgen CLK_TOP_SGM_0_SEL>, + <&sgmiisys0 CLK_SGM0_TX_EN>, + <&sgmiisys0 CLK_SGM0_RX_EN>, + <&xfi_pll CLK_XFIPLL_PLL_EN>; + clock-names = "usxgmii", "sgmii_sel", "sgmii_tx", "sgmii_rx", "xfi_pll"; + resets = <&watchdog MT7988_TOPRGU_XFI0_GRST>, + <&watchdog MT7988_TOPRGU_SGMII0_GRST>; + reset-names = "xfi", "sgmii"; + phys = <&xfi_pextp0>; + mediatek,sgmiisys = <&sgmiisys0>; + #pcs-cells = <0>; + }; + }; -- 2.42.1