On Tue, 17 Oct 2023 at 15:07, Sricharan Ramabadhran
<quic_srichara@xxxxxxxxxxx> wrote:
>
>
>
> On 10/5/2023 12:38 AM, Robert Marko wrote:
> >
> > On 22. 09. 2023. 13:51, Sricharan R wrote:
> >> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> >>
> >> IPQ5018 has tsens V1.0 IP with 4 sensors.
> >> There is no RPM, so tsens has to be manually enabled. Adding the tsens
> >> and nvmem node and IPQ5018 has 4 thermal sensors (zones). With the
> >> critical temperature being 120'C and action is to reboot. Adding all
> >> the 4 zones here.
> >>
> >> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> >> ---
> >> [v3] Ordered the qfprom device node properties as per
> >> Krzysztof's comments
> >>
> >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++++++++++
> >> 1 file changed, 169 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> >> b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> >> index 9f13d2dcdfd5..9e28b54ebcbd 100644
> >> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> >> @@ -93,6 +93,117 @@ soc: soc@0 {
> >> #size-cells = <1>;
> >> ranges = <0 0 0 0xffffffff>;
> >> + qfprom: qfprom@a0000 {
> >> + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> > Hi,
> >
> > "qcom,ipq5018-qfprom" needs to be documented in QFPROM bindings first.
>
> Already posted here [1]. Initially had it in the same series, but kept
> it separately based on review comments.
>
> [1] https://www.spinics.net/lists/devicetree/msg633408.html
Well, if it's not part of the same series then this addition would
cause a warning as its
undocumented.
I also dont see where is it documented as part of the v2 series.
Regards,
Robert
>
> Regards,
> Sricharan
