On 10/5/2023 12:37 AM, Robert Marko wrote:
On 22. 09. 2023. 13:51, Sricharan R wrote:
From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt.
The soc does not have a RPM, hence tsens has to be reset and
enabled in the driver init. Adding the driver support for same.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
[v3] Fixed Dmitry's comments for error checks in init_ipq5018
drivers/thermal/qcom/tsens-v1.c | 60 +++++++++++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 3 ++
drivers/thermal/qcom/tsens.h | 2 +-
3 files changed, 64 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/tsens-v1.c
b/drivers/thermal/qcom/tsens-v1.c
index dc1c4ae2d8b0..acee2064f83e 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = {
.trip_max_temp = 120000,
};
+static struct tsens_features tsens_v1_ipq5018_feat = {
+ .ver_major = VER_1_X,
+ .crit_int = 0,
+ .combo_int = 0,
+ .adc = 1,
+ .srot_split = 1,
+ .max_sensors = 11,
+ .trip_min_temp = -40000,
+ .trip_max_temp = 120000,
+ .ignore_enable = 1,
+};
+
static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
/* ----- SROT ------ */
/* VERSION */
@@ -150,6 +162,41 @@ static int __init init_8956(struct tsens_priv
*priv) {
return init_common(priv);
}
+static int init_ipq5018(struct tsens_priv *priv)
__init is missing after int, otherwise I get modpost warning while
building:
WARNING: modpost: vmlinux: section mismatch in reference:
init_ipq5018+0x14 (section: .text) -> init_common (section: .init.text)
ok, will fix it.
Regards,
Sricharan
