Re: [PATCH 8/8] dt-bindings: display: Add SSD132x OLED controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 11, 2023 at 08:34:29AM +0200, Javier Martinez Canillas wrote:
> Conor Dooley <conor@xxxxxxxxxx> writes:
> >> +  # Only required for SPI
> >> +  dc-gpios:
> >> +    description:
> >> +      GPIO connected to the controller's D/C# (Data/Command) pin,
> >> +      that is needed for 4-wire SPI to tell the controller if the
> >> +      data sent is for a command register or the display data RAM
> >> +    maxItems: 1
> >> +
> >> +  solomon,height:
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +    description:
> >> +      Height in pixel of the screen driven by the controller.
> >> +      The default value is controller-dependent.
> >
> > You probably know better than me, operating in drm stuff, but are there
> > really no generic properties for the weidth/height of a display?
> >
> 
> There are some common properties, such as the width-mm and height-mm for
> the panel-common:
> 
> Documentation/devicetree/bindings/display/panel/panel-common.yaml
> 
> But those are to describe the physical area expressed in millimeters and
> the Solomon drivers (the old ssd1307fb fbdev driver and the new ssd130x
> DRM driver for backward compatibility with existing DTB) express the width
> and height in pixels.
> 
> That's why are Solomon controller specific properties "solomon,width" and
> "solomon,height".

Okay. Thanks for the explanation.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux