Add a Device Tree binding schema for the OLED panels based on the Solomon SSD132x family of controllers. Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx> --- .../bindings/display/solomon,ssd132x.yaml | 116 ++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd132x.yaml diff --git a/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml new file mode 100644 index 000000000000..b64904703a3a --- /dev/null +++ b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd132x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD132x OLED Controllers + +maintainers: + - Javier Martinez Canillas <javierm@xxxxxxxxxx> + +properties: + compatible: + oneOf: + - enum: + - solomon,ssd1322 + - solomon,ssd1325 + - solomon,ssd1327 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + # Only required for SPI + dc-gpios: + description: + GPIO connected to the controller's D/C# (Data/Command) pin, + that is needed for 4-wire SPI to tell the controller if the + data sent is for a command register or the display data RAM + maxItems: 1 + + solomon,height: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Height in pixel of the screen driven by the controller. + The default value is controller-dependent. + + solomon,width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Width in pixel of the screen driven by the controller. + The default value is controller-dependent. + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + contains: + const: solomon,ssd1322 + then: + properties: + width: + default: 480 + height: + default: 128 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1325 + then: + properties: + width: + default: 128 + height: + default: 80 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1327 + then: + properties: + width: + default: 128 + height: + default: 128 + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ssd1327_i2c: oled@3c { + compatible = "solomon,ssd1327"; + reg = <0x3c>; + reset-gpios = <&gpio2 7>; + }; + + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ssd1327_spi: oled@0 { + compatible = "solomon,ssd1327"; + reg = <0x0>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + }; -- 2.41.0
