On Thu, 5 Oct 2023 at 14:26, Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> Add the inlet temperature at address 0x48, which is connected
> via BMC I2C8.
>
> Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
> ---
> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> index 88693c2b2dbe..c676172f0dbf 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> @@ -510,6 +510,11 @@
> &i2c8 {
> status = "okay";
>
> + temperature-sensor@48 {
> + compatible = "ti,tmp112";
> + reg = <0x48>;
> + };
> +
> gpio@77 {
> compatible = "nxp,pca9539";
> reg = <0x77>;
> --
> 2.17.1
>
