Add the inlet temperature at address 0x48, which is connected
via BMC I2C8.
Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 88693c2b2dbe..c676172f0dbf 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -510,6 +510,11 @@
&i2c8 {
status = "okay";
+ temperature-sensor@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ };
+
gpio@77 {
compatible = "nxp,pca9539";
reg = <0x77>;
--
2.17.1
