Re: [PATCH v7 17/26] PM / devfreq: rockchip-dfi: make register stride SoC specific

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23. 7. 4. 18:32, Sascha Hauer wrote:
> The currently supported RK3399 has a stride of 20 between the channel
> specific registers. Upcoming RK3588 has a different stride, so put
> the stride into driver data to make it configurable.
> While at it convert decimal 20 to hex 0x14 for consistency with RK3588
> which has a register stride 0x4000 and we want to write that in hex
> as well.
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
>  drivers/devfreq/event/rockchip-dfi.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c
> index 969b62f071b83..85ec93fd41858 100644
> --- a/drivers/devfreq/event/rockchip-dfi.c
> +++ b/drivers/devfreq/event/rockchip-dfi.c
> @@ -112,6 +112,7 @@ struct rockchip_dfi {
>  	int active_events;
>  	int burst_len;
>  	int buswidth[DMC_MAX_CHANNELS];
> +	int ddrmon_stride;
>  };
>  
>  static int rockchip_dfi_enable(struct rockchip_dfi *dfi)
> @@ -189,13 +190,13 @@ static void rockchip_dfi_read_counters(struct rockchip_dfi *dfi, struct dmc_coun
>  		if (!(dfi->channel_mask & BIT(i)))
>  			continue;
>  		c->c[i].read_access = readl_relaxed(dfi_regs +
> -				DDRMON_CH0_RD_NUM + i * 20);
> +				DDRMON_CH0_RD_NUM + i * dfi->ddrmon_stride);
>  		c->c[i].write_access = readl_relaxed(dfi_regs +
> -				DDRMON_CH0_WR_NUM + i * 20);
> +				DDRMON_CH0_WR_NUM + i * dfi->ddrmon_stride);
>  		c->c[i].access = readl_relaxed(dfi_regs +
> -				DDRMON_CH0_DFI_ACCESS_NUM + i * 20);
> +				DDRMON_CH0_DFI_ACCESS_NUM + i * dfi->ddrmon_stride);
>  		c->c[i].clock_cycles = readl_relaxed(dfi_regs +
> -				DDRMON_CH0_COUNT_NUM + i * 20);
> +				DDRMON_CH0_COUNT_NUM + i * dfi->ddrmon_stride);

Before this path, rk3399 and rk3568 have used the same stride.
But, this patch add the ddrmon_stride for only rk3399. 

It seems that the behavior of rk3568 is changed. 
If ddrmon_stride is not required for rk3568,
you must move this patch before adding rk3568 support patch ("PM / devfreq: rockchip-dfi: Add RK3568 support").

>  	}
>  }
>  
> @@ -664,6 +665,8 @@ static int rk3399_dfi_init(struct rockchip_dfi *dfi)
>  	dfi->buswidth[0] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH0, val) == 0 ? 4 : 2;
>  	dfi->buswidth[1] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH1, val) == 0 ? 4 : 2;
>  
> +	dfi->ddrmon_stride = 0x14;
> +
>  	return 0;
>  };
>  

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux