The currently supported RK3399 has a stride of 20 between the channel specific registers. Upcoming RK3588 has a different stride, so put the stride into driver data to make it configurable. While at it convert decimal 20 to hex 0x14 for consistency with RK3588 which has a register stride 0x4000 and we want to write that in hex as well. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- drivers/devfreq/event/rockchip-dfi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c index 969b62f071b83..85ec93fd41858 100644 --- a/drivers/devfreq/event/rockchip-dfi.c +++ b/drivers/devfreq/event/rockchip-dfi.c @@ -112,6 +112,7 @@ struct rockchip_dfi { int active_events; int burst_len; int buswidth[DMC_MAX_CHANNELS]; + int ddrmon_stride; }; static int rockchip_dfi_enable(struct rockchip_dfi *dfi) @@ -189,13 +190,13 @@ static void rockchip_dfi_read_counters(struct rockchip_dfi *dfi, struct dmc_coun if (!(dfi->channel_mask & BIT(i))) continue; c->c[i].read_access = readl_relaxed(dfi_regs + - DDRMON_CH0_RD_NUM + i * 20); + DDRMON_CH0_RD_NUM + i * dfi->ddrmon_stride); c->c[i].write_access = readl_relaxed(dfi_regs + - DDRMON_CH0_WR_NUM + i * 20); + DDRMON_CH0_WR_NUM + i * dfi->ddrmon_stride); c->c[i].access = readl_relaxed(dfi_regs + - DDRMON_CH0_DFI_ACCESS_NUM + i * 20); + DDRMON_CH0_DFI_ACCESS_NUM + i * dfi->ddrmon_stride); c->c[i].clock_cycles = readl_relaxed(dfi_regs + - DDRMON_CH0_COUNT_NUM + i * 20); + DDRMON_CH0_COUNT_NUM + i * dfi->ddrmon_stride); } } @@ -664,6 +665,8 @@ static int rk3399_dfi_init(struct rockchip_dfi *dfi) dfi->buswidth[0] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH0, val) == 0 ? 4 : 2; dfi->buswidth[1] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH1, val) == 0 ? 4 : 2; + dfi->ddrmon_stride = 0x14; + return 0; }; -- 2.39.2