Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for different ds values on different groups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/09/2023 06:39, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> RZ/G3S supports different drive strength values for different power sources
> and pin groups (A, B, C). On each group there could be up to 4 drive
> strength values per power source. Available power sources are 1v8, 2v5,
> 3v3. Drive strength values are fine tuned than what was previously

Should this be "are more fine tuned" or "are less fine tuned"?

> available on the driver thus the necessity of having micro-amp support.
> As drive strength and power source values are linked together the
> hardware setup for these was moved at the end of
> rzg2l_pinctrl_pinconf_set() to ensure proper validation of the new
> values.
> 
> The drive strength values are expected to be initialized though SoC
> specific hardware configuration data structure.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Thanks,
Paul

Attachment: OpenPGP_0x27F4B3459F002257.asc
Description: OpenPGP public key

Attachment: OpenPGP_signature
Description: OpenPGP digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux