eDMAv3 patch was accepted. https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next This is dts parts. Add 8qxp edma support and enable lpuart1..3 dma support. Change from v1 to v2 - rebase scu-pd.c to 6.6rc1 - change "F" to "f" - Add 8qm edma dts change. - Add lpuart0 dma setting (console tty will disable dma) Frank Li (7): genpd: imx: scu-pd: fixed dma2-ch domain defination arm64: dts: imx8: add edma[0..3] arm64: dts: imx8: add edma for uart[0..3] arm64: dts: imx8qm: Update edma channel for uart[0..3] arm64: dts: imx8: update lpuart[0..3] irq number arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3 arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3 .../boot/dts/freescale/imx8-ss-audio.dtsi | 88 +++++++++++++++++++ .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 78 +++++++++++++++- .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 30 +++++++ arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 26 ++++++ .../boot/dts/freescale/imx8qm-ss-dma.dtsi | 56 ++++++++++++ arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 ++++++ drivers/genpd/imx/scu-pd.c | 3 +- 7 files changed, 302 insertions(+), 5 deletions(-) -- 2.34.1
