Original irq number combined UART irq and DMA irq. These doesn't match
uart driver and dma engine's expection.
Update to the irq numbers, which just uart can trigger.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 8fd924dfb029..ce66d30a4839 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -86,7 +86,7 @@ lpspi3: spi@5a030000 {
lpuart0: serial@5a060000 {
reg = <0x5a060000 0x1000>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
<&uart0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
@@ -100,7 +100,7 @@ lpuart0: serial@5a060000 {
lpuart1: serial@5a070000 {
reg = <0x5a070000 0x1000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
<&uart1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
@@ -114,7 +114,7 @@ lpuart1: serial@5a070000 {
lpuart2: serial@5a080000 {
reg = <0x5a080000 0x1000>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
<&uart2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
@@ -128,7 +128,7 @@ lpuart2: serial@5a080000 {
lpuart3: serial@5a090000 {
reg = <0x5a090000 0x1000>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
<&uart3_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
--
2.34.1
