On Wed, Sep 13, 2023 at 09:55:14PM +0300, Danila Tikhonov wrote:
> WLED is used for controlling the backlight on some boards, add the node
> for it.
>
> Signed-off-by: Danila Tikhonov <danila@xxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> index b1686e5777b8..ac08a09c64c2 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> @@ -132,5 +132,15 @@ pm8150l_lpg: pwm {
> status = "disabled";
> };
>
> + pm8150l_wled: leds@d800 {
> + compatible = "qcom,pm8150l-wled";
> + reg = <0xd800>, <0xd900>;
> + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
> + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "ovp", "short";
> + label = "backlight";
> +
> + status = "disabled";
> + };
> };
> };
> --
> 2.41.0
>
