WLED is used for controlling the backlight on some boards, add the node
for it.
Signed-off-by: Danila Tikhonov <danila@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index b1686e5777b8..ac08a09c64c2 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -132,5 +132,15 @@ pm8150l_lpg: pwm {
status = "disabled";
};
+ pm8150l_wled: leds@d800 {
+ compatible = "qcom,pm8150l-wled";
+ reg = <0xd800>, <0xd900>;
+ interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ovp", "short";
+ label = "backlight";
+
+ status = "disabled";
+ };
};
};
--
2.41.0
