Re: [PATCH v2 5/8] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 15, 2023 at 10:15:06AM +0800, Tengfei Fan wrote:
> From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
> 
> Add apps_rsc node and cmd_db memory region for sm4450.
> 
> Signed-off-by: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm4450.dtsi | 34 ++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> index c4e5b33f5169..0d1d39197d77 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -328,6 +329,18 @@
>  		};
>  	};
>  
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		aop_cmd_db_mem: cmd-db@80860000 {
> +			compatible = "qcom,cmd-db";
> +			reg = <0x0 0x80860000 0x0 0x20000>;
> +			no-map;
> +		};
> +	};
> +
>  	soc: soc@0 {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> @@ -335,6 +348,27 @@
>  		dma-ranges = <0 0 0 0 0x10 0>;
>  		compatible = "simple-bus";
>  
> +		apps_rsc: rsc@17a00000 {
> +			compatible = "qcom,rpmh-rsc";
> +			reg = <0 0x17a00000 0 0x10000>,

As your later patch shows, and Krzysztof pointed out, the sort order is
wrong here (sort nodes under /soc by address).

> +			      <0 0x17a10000 0 0x10000>,
> +			      <0 0x17a20000 0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +			label = "apps_rsc";
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;

Please confirm that you indeed want 0 CONTROL_TCSs.

Thanks,
Bjorn

> +			power-domains = <&CLUSTER_PD>;
> +
> +			apps_bcm_voter: bcm-voter {
> +				compatible = "qcom,bcm-voter";
> +			};
> +		};
> +
>  		tcsr_mutex: hwlock@1f40000 {
>  			compatible = "qcom,tcsr-mutex";
>  			reg = <0x0 0x01f40000 0x0 0x40000>;
> -- 
> 2.17.1
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux