Re: [PATCH v2 5/8] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 9/20/2023 11:49 AM, Bjorn Andersson 写道:
On Fri, Sep 15, 2023 at 10:15:06AM +0800, Tengfei Fan wrote:
From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>

Add apps_rsc node and cmd_db memory region for sm4450.

Signed-off-by: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm4450.dtsi | 34 ++++++++++++++++++++++++++++
  1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index c4e5b33f5169..0d1d39197d77 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
  #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
  	interrupt-parent = <&intc>;
@@ -328,6 +329,18 @@
  		};
  	};
+ reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+	};
+
  	soc: soc@0 {
  		#address-cells = <2>;
  		#size-cells = <2>;
@@ -335,6 +348,27 @@
  		dma-ranges = <0 0 0 0 0x10 0>;
  		compatible = "simple-bus";
+ apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,

As your later patch shows, and Krzysztof pointed out, the sort order is
wrong here (sort nodes under /soc by address).
I will ajdust this sort order.

+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;

Please confirm that you indeed want 0 CONTROL_TCSs.

Thanks,
Bjorn
Hi Bjorn,
yes, I confirmed this from internal power team, CONTROL_TCS with 0 is ok.

+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
  		tcsr_mutex: hwlock@1f40000 {
  			compatible = "qcom,tcsr-mutex";
  			reg = <0x0 0x01f40000 0x0 0x40000>;
--
2.17.1


--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux