The GENI UART driver requires one specifies a numeric alias. Do so and set the stdout-path to route the console to the debug uart in the microSD slot by default. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index ecdc20bc10f5..e07d0311ecb5 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -18,7 +18,12 @@ / { qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ qcom,board-id = <0x10008 0>; + aliases { + serial0 = &uart12; + }; + chosen { + stdout-path = "serial0:115200n8"; #address-cells = <2>; #size-cells = <2>; ranges; --- base-commit: 3c13c772fc233a10342c8e1605ff0855dfdf0c89 change-id: 20230912-topic-edoconsole-f1395cae5f9a Best regards, -- Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>