From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Add Critical and hot trips for emergency system shutdown and limiting
system load.
Change passive trip to active to make sure fan is activated on the
lowest trip.
Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones")
Suggested-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 207510abda89..36d8945400df 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -614,22 +614,34 @@ cpu_thermal: cpu-thermal {
thermal-sensors = <&thermal 0>;
trips {
+ cpu_trip_crit: crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu_trip_hot: hot {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
cpu_trip_active_high: active-high {
temperature = <115000>;
hysteresis = <2000>;
type = "active";
};
- cpu_trip_active_low: active-low {
+ cpu_trip_active_med: active-med {
temperature = <85000>;
hysteresis = <2000>;
type = "active";
};
- cpu_trip_passive: passive {
- temperature = <40000>;
+ cpu_trip_active_low: active-low {
+ temperature = <60000>;
hysteresis = <2000>;
- type = "passive";
+ type = "active";
};
};
};
--
2.34.1
