Il 20/08/23 17:31, Frank Wunderlich ha scritto:
From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> Add Critical and hot trips for emergency system shutdown and limiting system load. Change passive trip to active to make sure fan is activated on the lowest trip. Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones") Suggested-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index 207510abda89..36d8945400df 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -614,22 +614,34 @@ cpu_thermal: cpu-thermal { thermal-sensors = <&thermal 0>;trips {+ cpu_trip_crit: crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <120000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu_trip_active_high: active-high { temperature = <115000>; hysteresis = <2000>; type = "active"; };- cpu_trip_active_low: active-low {+ cpu_trip_active_med: active-med { temperature = <85000>; hysteresis = <2000>; type = "active"; };- cpu_trip_passive: passive {
Rule of thumb is that each commit has to build on its own: this will break build because of mt7986a-bananapi-bpi-r3.dts referencing the now unexistant cpu_trip_passive phandle. Solving that is simple. Merge commit [2/3] and [3/3] in a single commit. Obviously, retain both fixes tags :-) Cheers, Angelo
