Re: [PATCH v3 3/3] arm64: dts: qcom: sc7180: Add board id for lazor/limozeen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/08/2023 08:49, Sheng-Liang Pan wrote:
> add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS
> 
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
> 
> Changes in v3:
> - sort out the node order alphabetically
> 
> Changes in v2:
> - correct newly create dts files
> 
>  arch/arm64/boot/dts/qcom/Makefile             |  5 ++
>  ...sc7180-trogdor-lazor-limozeen-nots-r10.dts | 40 +++++++++++++
>  .../sc7180-trogdor-lazor-limozeen-nots-r9.dts |  4 +-
>  .../sc7180-trogdor-lazor-limozeen-r10.dts     | 56 +++++++++++++++++++
>  .../qcom/sc7180-trogdor-lazor-limozeen-r9.dts |  4 +-
>  .../dts/qcom/sc7180-trogdor-lazor-r10-kb.dts  | 34 +++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 38 +++++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r10.dts     | 30 ++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts   |  4 +-
>  .../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts  |  4 +-
>  .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts |  4 +-
>  11 files changed, 213 insertions(+), 10 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 337abc4ceb17..73e745fb1ff0 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -109,11 +109,16 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-kb.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10-kb.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r5.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> new file mode 100644
> index 000000000000..bfeddd287aaf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Lazor Limozeen board device tree source
> + *
> + * Copyright 2023 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180-trogdor.dtsi"
> +#include "sc7180-trogdor-parade-ps8640.dtsi"
> +#include "sc7180-trogdor-lazor.dtsi"
> +#include "sc7180-trogdor-lte-sku.dtsi"
> +
> +/ {
> +	model = "Google Lazor Limozeen without Touchscreen (rev10+)";
> +	compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";

Isn't this duplicated with r9? Probably other places as well... or....

> +};
> +
> +/delete-node/&ap_ts;
> +
> +&alc5682 {
> +	compatible = "realtek,rt5682s";
> +	/delete-property/ VBAT-supply;
> +	realtek,dmic1-clk-pin = <2>;
> +	realtek,dmic-clk-rate-hz = <2048000>;
> +};
> +
> +&panel {
> +	compatible = "edp-panel";
> +};
> +
> +&sdhc_2 {
> +	status = "okay";
> +};
> +
> +&sound {
> +	compatible = "google,sc7180-trogdor";
> +	model = "sc7180-rt5682s-max98357a-1mic";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
> index cef57c15b70b..e3f1f30a7fc3 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
> @@ -13,8 +13,8 @@
>  #include "sc7180-trogdor-lte-sku.dtsi"
>  
>  / {
> -	model = "Google Lazor Limozeen without Touchscreen (rev9+)";
> -	compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";
> +	model = "Google Lazor Limozeen without Touchscreen (rev9)";
> +	compatible = "google,lazor-rev9-sku6", "google,lazor-rev9-sku18", "qcom,sc7180";

Your patch 2 does not make any sense. Didn't you touch it in patch 2?
Really, what is happening here?



Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux