Re: [PATCH v7 1/2] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 02, 2023 at 11:57:47AM -0400, Frank Li wrote:
> Introduce helper function dw_pcie_get_ltssm to retrieve SMLH_LTSS_STATE.

s/dw_pcie_get_ltssm/dw_pcie_get_ltssm()/

> Add callback .pme_turn_off and .exit_from_l2 for platform specific PME
> handling.
> 
> Add common dw_pcie_suspend(resume)_noirq() API to avoid duplicated code
> in dwc pci host controller platform driver.
> 
> Typical L2 entry workflow/dw_pcie_suspend_noirq()
> 
> 1. Transmit PME turn off signal to PCI devices and wait for PME_To_Ack.
> 2. Await link entering L2_IDLE state.
> 
> Typical L2 exit workflow/dw_pcie_resume_noirq()
> 
> 1. Issue exit from L2 command.
> 2. Reinitialize PCI host.
> 3. Wait for link to become active.
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>  Change from v6 to v7
>  - change according to Manivannan's comments.
>    fix sleep value 100 (should be 1000 for 1ms).

> +	 * PCI Express Base Specification Rev 4.0 Section 5.3.3.2.1 PME
> +	 * Synchronization Recommends 1ms to 10ms timeout to check L2 ready.
> +	 */
> +	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> +				1000, 10000, false, pci);

Thanks for the spec citation.  Can you please reference the current
spec, i.e., "PCIe r6.0, sec 5.3.3.2.1".

s/Recommends/recommends/

It would really be great to have a #define for this since the bare
numbers are not very meaningful and they're not specific to DWC so a
#define would let us find similar situations in other drivers.

Bjorn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux