Re: [PATCH v6 2/2] HID: i2c-hid: elan: Add ili9882t timing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Benjamin,

On Wed, Aug 2, 2023 at 12:20 AM Cong Yang
<yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> The ili9882t is a TDDI IC (Touch with Display Driver). The
> datasheet specifies there should be 60ms between touch SDA
> sleep and panel RESX. Doug's series[1] allows panels and
> touchscreens to power on/off together, so we can add the 65 ms
> delay in i2c_hid_core_suspend before panel_unprepare.
>
> Because ili9882t touchscrgeen is a panel follower, and
> needs to use vccio-supply instead of vcc33-supply, so set
> it NULL to ili9882t_chip_data, then not use vcc33 regulator.
>
> [1]: https://lore.kernel.org/all/20230727171750.633410-1-dianders@xxxxxxxxxxxx
>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/hid/i2c-hid/i2c-hid-of-elan.c | 50 ++++++++++++++++++++-------
>  1 file changed, 38 insertions(+), 12 deletions(-)


>
> diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c
> index 029045d9661c..31abab57ad44 100644
> --- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c
> +++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c
> @@ -18,9 +18,11 @@
>  #include "i2c-hid.h"
>
>  struct elan_i2c_hid_chip_data {
> -       unsigned int post_gpio_reset_delay_ms;
> +       unsigned int post_gpio_reset_on_delay_ms;
> +       unsigned int post_gpio_reset_off_delay_ms;
>         unsigned int post_power_delay_ms;
>         u16 hid_descriptor_address;
> +       const char *main_supply_name;
>  };
>
>  struct i2c_hid_of_elan {
> @@ -38,9 +40,11 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops)
>                 container_of(ops, struct i2c_hid_of_elan, ops);
>         int ret;
>
> -       ret = regulator_enable(ihid_elan->vcc33);
> -       if (ret)
> -               return ret;
> +       if (ihid_elan->vcc33) {
> +               ret = regulator_enable(ihid_elan->vcc33);
> +               if (ret)
> +                       return ret;
> +       }
>
>         ret = regulator_enable(ihid_elan->vccio);
>         if (ret) {
> @@ -52,8 +56,8 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops)
>                 msleep(ihid_elan->chip_data->post_power_delay_ms);
>
>         gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0);
> -       if (ihid_elan->chip_data->post_gpio_reset_delay_ms)
> -               msleep(ihid_elan->chip_data->post_gpio_reset_delay_ms);
> +       if (ihid_elan->chip_data->post_gpio_reset_on_delay_ms)
> +               msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms);
>
>         return 0;
>  }
> @@ -64,8 +68,12 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops)
>                 container_of(ops, struct i2c_hid_of_elan, ops);
>
>         gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1);
> +       if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms)
> +               msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms);
> +
>         regulator_disable(ihid_elan->vccio);
> -       regulator_disable(ihid_elan->vcc33);
> +       if (ihid_elan->vcc33)
> +               regulator_disable(ihid_elan->vcc33);
>  }
>
>  static int i2c_hid_of_elan_probe(struct i2c_client *client)
> @@ -89,24 +97,42 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client)
>         if (IS_ERR(ihid_elan->vccio))
>                 return PTR_ERR(ihid_elan->vccio);
>
> -       ihid_elan->vcc33 = devm_regulator_get(&client->dev, "vcc33");
> -       if (IS_ERR(ihid_elan->vcc33))
> -               return PTR_ERR(ihid_elan->vcc33);
> -
>         ihid_elan->chip_data = device_get_match_data(&client->dev);
>
> +       if (ihid_elan->chip_data->main_supply_name) {
> +               ihid_elan->vcc33 = devm_regulator_get(&client->dev,
> +                                                     ihid_elan->chip_data->main_supply_name);
> +               if (IS_ERR(ihid_elan->vcc33))
> +                       return PTR_ERR(ihid_elan->vcc33);
> +       }
> +
>         return i2c_hid_core_probe(client, &ihid_elan->ops,
>                                   ihid_elan->chip_data->hid_descriptor_address, 0);
>  }
>
>  static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = {
>         .post_power_delay_ms = 1,
> -       .post_gpio_reset_delay_ms = 300,
> +       .post_gpio_reset_on_delay_ms = 300,
> +       .hid_descriptor_address = 0x0001,
> +       .main_supply_name = "vcc33",
> +};
> +
> +static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = {
> +       .post_power_delay_ms = 1,
> +       .post_gpio_reset_on_delay_ms = 200,
> +       .post_gpio_reset_off_delay_ms = 65,
>         .hid_descriptor_address = 0x0001,
> +       /*
> +        * this touchscreen is tightly integrated with the panel and assumes
> +        * that the relevant power rails (other than the IO rail) have already
> +        * been turned on by the panel driver because we're a panel follower.
> +        */
> +       .main_supply_name = NULL,
>  };
>
>  static const struct of_device_id elan_i2c_hid_of_match[] = {
>         { .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data },
> +       { .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data },

Logically, this patch depends on the panel-follower series that's now
landed in drm-misc-next. With your Ack, I'm willing to land these two
patches into drm-misc-next too. Other options:

a) We could land the two patches in the i2c-hid tree since they don't
appear to conflict. The touchscreen won't actually function until the
patches meetup in linux-next but I don't think they'll give any
compile errors (I haven't double-checked that, but I can). ...though
it's possible that the dt bindings might generate errors? Again, I can
investigate if we want to go this way.

b) We can snooze this for a few months and you can pick it to i2c-hid
when my series reaches mainline.

Let me know how you'd like to proceed.

-Doug




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux