Re: [PATCH v2 1/2] gpio: dt-bindings: add parsing of loongson gpio offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 02, 2023 at 09:38:34AM +0800, Yinbo Zhu wrote:
> 
> 
> 在 2023/8/1 下午11:54, Conor Dooley 写道:
> > On Tue, Aug 01, 2023 at 04:34:30PM +0800, Yinbo Zhu wrote:
> > > 
> > > 
> > > 在 2023/8/1 下午3:23, Conor Dooley 写道:
> > > > On Tue, Aug 01, 2023 at 02:39:49PM +0800, Yinbo Zhu wrote:
> > > > > 
> > > > > 
> > > > > 在 2023/7/31 下午11:55, Conor Dooley 写道:
> > > > > > On Mon, Jul 31, 2023 at 05:10:58PM +0800, Yinbo Zhu wrote:
> > > > > > > Add parsing GPIO configure, input, output, interrupt register offset
> > > > > > > address and GPIO control mode support.
> > > > > > 
> > > > > > This reeks of insufficient use of SoC specific compatibles. Do GPIO
> > > > > > controllers on the same SoC have different register offsets?
> > > > > 
> > > > > 
> > > > > Yes,
> > > > > 
> > > > > > Where are the users for this?
> > > > > 
> > > > > 
> > > > > For example, ls2k500 contains multiple GPIO chips with different
> > > > > (configure, input, output, interrupt) offset addresses, but all others
> > > > > are the same.
> > > > 
> > > > Right. That's admittedly not what I expected to hear! Can you firstly
> > > > explain this in the commit message,
> > > 
> > > 
> > > I will add following explain in the commit message. Do you think it's
> > > suitable?
> > > 
> > > Loongson GPIO controllers come in multiple variants that are compatible
> > > except for certain register offset values.  Add support in yaml file for
> > > device properties allowing to specify them in DT.
> > 
> > Sure, that would be helpful.
> > 
> > > > and secondly add a soc-specific
> > > > compatible for the ls2k500 and only allow these properties on that SoC?
> > 
> > > Sorry, I may not have described it clearly before, the ls2k500 was only
> > > as a example, actually, Loongson GPIO controllers (2k500,2k1000,eg)come
> > > in multiple variants that are compatible except for certain register
> > > offset values.  So above all offset device property was used to in all
> > > loongson gpio controller.
> > 
> > But it would be good to know why they are different. Do they each
> > support some different features, or was there some other reason for
> > making controllers like this?
> 
> 
> There are no other reasons, just differences in these offset addresses.

Huh. Do you have a link to a devicetree for the ls2k500?

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux