Re: [PATCH v2 1/2] gpio: dt-bindings: add parsing of loongson gpio offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 31, 2023 at 05:10:58PM +0800, Yinbo Zhu wrote:
> Add parsing GPIO configure, input, output, interrupt register offset
> address and GPIO control mode support.

This reeks of insufficient use of SoC specific compatibles. Do GPIO
controllers on the same SoC have different register offsets?
Where are the users for this?

Cheers,
Conor.

> 
> Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
> ---
>  .../bindings/gpio/loongson,ls-gpio.yaml       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
> index fb86e8ce6349..cad67f8bfe6e 100644
> --- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
> @@ -29,6 +29,33 @@ properties:
>  
>    gpio-ranges: true
>  
> +  loongson,gpio-conf-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This option indicate this GPIO configuration register offset address.
> +
> +  loongson,gpio-out-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This option indicate this GPIO output register offset address.
> +
> +  loongson,gpio-in-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This option indicate this GPIO input register offset address.
> +
> +  loongson,gpio-ctrl-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This option indicate this GPIO control mode, where '0' represents
> +      bit control mode and '1' represents byte control mode.
> +
> +  loongson,gpio-inten-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This option indicate this GPIO interrupt enable register offset
> +      address.
> +
>    interrupts:
>      minItems: 1
>      maxItems: 64
> @@ -39,6 +66,11 @@ required:
>    - ngpios
>    - "#gpio-cells"
>    - gpio-controller
> +  - loongson,gpio-conf-offset
> +  - loongson,gpio-in-offset
> +  - loongson,gpio-out-offset
> +  - loongson,gpio-ctrl-mode
> +  - loongson,gpio-inten-offset
>    - gpio-ranges
>    - interrupts
>  
> @@ -54,6 +86,11 @@ examples:
>        ngpios = <64>;
>        #gpio-cells = <2>;
>        gpio-controller;
> +      loongson,gpio-conf-offset = <0>;
> +      loongson,gpio-in-offset = <0x20>;
> +      loongson,gpio-out-offset = <0x10>;
> +      loongson,gpio-ctrl-mode = <0>;
> +      loongson,gpio-inten-offset = <0x30>;
>        gpio-ranges = <&pctrl 0 0 15>,
>                      <&pctrl 16 16 15>,
>                      <&pctrl 32 32 10>,
> -- 
> 2.20.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux