This patch serises are to add PLL clocks driver and providers by writing and reading syscon registers for the StarFive JH7110 RISC-V SoC. And add documentation and nodes to describe StarFive System Controller(syscon) Registers. This patch serises are based on Linux 6.4. PLLs are high speed, low jitter frequency synthesizers in JH7110. Each PLL clock works in integer mode or fraction mode by some dividers, and the dividers are set in several syscon registers. The formula for calculating frequency is: Fvco = Fref * (NI + NF) / M / Q1 The first patch adds docunmentation to describe PLL clock bindings, and the second patch adds documentation to decribe syscon registers. The patch 3 modifies the SYSCRG bindings and adds PLL clock inputs. The patch 4 adds driver to support PLL clocks for JH7110. The patch 5 modifies the system clock driver and can select the PLL clock source from PLL clocks driver. And the patch 6 adds the stg/sys/aon syscon nodes for JH7110 SoC. The last patch modifies the syscrg node in JH7110 dts file. Changes since v6: - Rebased on Linux 6.5-rc2. - Patch 1 added the 'the' in front of 'JH7110' and changed the PLL clock names from 'JH7110_CLK_PLL?_OUT' to 'JH7110_PLLCLK_PLL?_OUT' in the binding of PLL. - Patch 2 modified the value of 'reg' in example to fix the error. - Patch 4 and 7 changed the PLL clock names from 'JH7110_CLK_PLL?_OUT' to 'JH7110_PLLCLK_PLL?_OUT' in the driver and dts. - Patch 5 added clk_put() and a better way to detect if the pll references are specified in the device tree or not. v6: https://lore.kernel.org/all/20230704064610.292603-1-xingyu.wu@xxxxxxxxxxxxxxxx/ Changes since v5: - Rebased on Linux 6.4. - Patch 1 fixed some grammatical mistake. - Patch 2 added the selection about properties from different syscon modules and madethe example completed. - Patch 3 dropped the 'optional' PLL clocks. v5: https://lore.kernel.org/all/20230613125852.211636-1-xingyu.wu@xxxxxxxxxxxxxxxx/ Changes since v4: - Rebased on Linux 6.4-rc6. - Patch 2 dropped the example node about sys-syscon. - Patch 3 used PLL clocks as one of optional items in SYSCRG bindings. - Patch 4 used the patch instead about PLL clocks driver from Emil. - Patch 5 retained the fixed factor PLL clocks as the optional source about PLL clocks in SYSCRG clock driver. - Patch 6 added the child node clock-controller as the complete sys-syscon node and patch 7 dropped this part. v4: https://lore.kernel.org/all/20230512022036.97987-1-xingyu.wu@xxxxxxxxxxxxxxxx/ Changes since v3: - Rebased on Linux 6.4-rc1. - Dropped the 'power-controller' property and used 'power-domain-cells' instead in syscon binding. - Used the data by of_device_id to get the syscon registers' configuration include offset, mask and shift. v3: https://lore.kernel.org/all/20230414024157.53203-1-xingyu.wu@xxxxxxxxxxxxxxxx/ Changes since v2: - Rebased on latest JH7110 basic clock drivers. - Added the complete documentation to describe syscon register. - Added syscon node in JH7110 dts file. - Modified the clock rate selection to match the closest rate in PLL driver when setting rate. v2: https://lore.kernel.org/all/20230316030514.137427-1-xingyu.wu@xxxxxxxxxxxxxxxx/ Changes since v1: - Changed PLL clock node to be child of syscon node in dts. - Modifed the definitions and names of function in PLL clock driver. - Added commit to update syscon and syscrg dt-bindings. v1: https://lore.kernel.org/all/20230221141147.303642-1-xingyu.wu@xxxxxxxxxxxxxxxx/ William Qiu (2): dt-bindings: soc: starfive: Add StarFive syscon module riscv: dts: starfive: jh7110: Add syscon nodes Xingyu Wu (5): dt-bindings: clock: Add StarFive JH7110 PLL clock generator dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs clk: starfive: Add StarFive JH7110 PLL clock driver clk: starfive: jh7110-sys: Add PLL clocks source from DTS riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node .../bindings/clock/starfive,jh7110-pll.yaml | 46 ++ .../clock/starfive,jh7110-syscrg.yaml | 18 +- .../soc/starfive/starfive,jh7110-syscon.yaml | 93 ++++ MAINTAINERS | 13 + arch/riscv/boot/dts/starfive/jh7110.dtsi | 30 +- drivers/clk/starfive/Kconfig | 9 + drivers/clk/starfive/Makefile | 1 + .../clk/starfive/clk-starfive-jh7110-pll.c | 507 ++++++++++++++++++ .../clk/starfive/clk-starfive-jh7110-sys.c | 66 ++- .../dt-bindings/clock/starfive,jh7110-crg.h | 6 + 10 files changed, 763 insertions(+), 26 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-pll.c -- 2.25.1
