Dear all,
On 15.05.23 22:57, Jakob Hauser wrote:
This patchset adds the charger driver "rt5033-charger". It is part of the
multifunction device rt5033. The patchset is based on an older version by
Beomho Seo of March 2015. For more information on the history and setup of
the patchset see the cover sheet of version v1, there is a link further down
below the changelog.
RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
was split into two threads on the lore list. Therefore sending it again.
Changes in v6:
- Patch 5: In function rt5033_charger_probe() after
calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
to "PTR_ERR(charger->chg)", as suggested by Christophe.
- Patch 9: Changed the patch from adding "power-supplies: true" to replacing
"additionalProperties: false" by "unevaluatedProperties: false", as
suggested by Krzysztof.
v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@xxxxxxxxxxxxxx/T/#t
v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@xxxxxxxxxxxxxx/T/#t
v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@xxxxxxxxxxxxxx/T/#t
v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@xxxxxxxxxxxxxx/T/#t
v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@xxxxxxxxxxxxxx/T/#t
The result of the patchset v6 can be seen at:
https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c
What's missing on this patchset? I'm not familiar with the procedures.
If all patches need ack's, then the ones for mfd (patches 2 & 4) and for
dt-bindings (patch 10) are missing.
Link to the current patchset v6:
- on lore:
https://lore.kernel.org/linux-pm/cover.1684182964.git.jahau@xxxxxxxxxxxxxx/T/#t
- on patchwork:
https://patchwork.kernel.org/project/linux-pm/list/?series=747771&state=%2A&archive=both
Jakob Hauser (9):
mfd: rt5033: Fix chip revision readout
mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
mfd: rt5033: Apply preparatory changes before adding rt5033-charger
driver
power: supply: rt5033_charger: Add RT5033 charger device driver
power: supply: rt5033_charger: Add cable detection and USB OTG supply
power: supply: rt5033_battery: Move struct rt5033_battery to battery
driver
power: supply: rt5033_battery: Adopt status property from charger
dt-bindings: power: supply: rt5033-battery: Apply
unevaluatedProperties
dt-bindings: Add rt5033 mfd, regulator and charger
Stephan Gerhold (1):
mfd: rt5033: Drop rt5033-battery sub-device
.../bindings/mfd/richtek,rt5033.yaml | 138 ++++
.../power/supply/richtek,rt5033-battery.yaml | 2 +-
.../power/supply/richtek,rt5033-charger.yaml | 65 ++
drivers/mfd/rt5033.c | 8 +-
drivers/power/supply/Kconfig | 8 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/rt5033_battery.c | 38 +-
drivers/power/supply/rt5033_charger.c | 744 ++++++++++++++++++
include/linux/mfd/rt5033-private.h | 64 +-
include/linux/mfd/rt5033.h | 24 -
10 files changed, 1034 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
create mode 100644 drivers/power/supply/rt5033_charger.c
Kind regards,
Jakob
