Add device tree binding documentation for rt5033 multifunction device, voltage regulator and battery charger. Cc: Beomho Seo <beomho.seo@xxxxxxxxxxx> Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../bindings/mfd/richtek,rt5033.yaml | 138 ++++++++++++++++++ .../power/supply/richtek,rt5033-charger.yaml | 65 +++++++++ 2 files changed, 203 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml new file mode 100644 index 000000000000..386b1a50158a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 Power Management Integrated Circuit + +maintainers: + - Jakob Hauser <jahau@xxxxxxxxxxxxxx> + +description: + RT5033 is a multifunction device which includes battery charger, fuel gauge, + flash LED current source, LDO and synchronous Buck converter for portable + applications. It is interfaced to host controller using I2C interface. The + battery fuel gauge uses a separate I2C bus. + +properties: + compatible: + const: richtek,rt5033 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + description: + The regulators of RT5033 have to be instantiated under a sub-node named + "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO + voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges + from 1.0 V to 3.0 V in 0.1 V steps. + type: object + patternProperties: + "^(SAFE_LDO|LDO|BUCK)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + + charger: + type: object + $ref: /schemas/power/supply/richtek,rt5033-charger.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + constant-charge-current-max-microamp = <1000000>; + charge-term-current-microamp = <150000>; + precharge-upper-limit-microvolt = <3500000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + extcon { + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&rt5033_charger>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + + regulators { + safe_ldo_reg: SAFE_LDO { + regulator-name = "SAFE_LDO"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + ldo_reg: LDO { + regulator-name = "LDO"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + + rt5033_charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml new file mode 100644 index 000000000000..5b3edd79a523 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 PMIC Battery Charger + +maintainers: + - Jakob Hauser <jahau@xxxxxxxxxxxxxx> + +description: + The battery charger of the multifunction device RT5033 has to be instantiated + under sub-node named "charger" using the following format. + +properties: + compatible: + const: richtek,rt5033-charger + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to the monitored battery according to battery.yaml. The battery + node needs to contain five parameters. + + precharge-current-microamp: + Current of pre-charge mode. The pre-charge current levels are 350 mA + to 650 mA programmed by I2C per 100 mA. + + constant-charge-current-max-microamp: + Current of fast-charge mode. The fast-charge current levels are 700 mA + to 2000 mA programmed by I2C per 100 mA. + + charge-term-current-microamp: + This property is end of charge current. Its level ranges from 150 mA + to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and + 600 mA in 100 mA steps. + + precharge-upper-limit-microvolt: + Voltage of pre-charge mode. If the battery voltage is below the pre-charge + threshold voltage, the charger is in pre-charge mode with pre-charge + current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V. + + constant-charge-voltage-max-microvolt: + Battery regulation voltage of constant voltage mode. This voltage levels + from 3.65 V to 4.4 V by I2C per 0.025 V. + + richtek,usb-connector: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to a USB connector according to usb-connector.yaml. The connector + should be a child of the extcon device. + +required: + - monitored-battery + +additionalProperties: false + +examples: + - | + charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; -- 2.39.2
