On 25/05/2023 14:29, Srinivas Kandagatla wrote:
> Soundwire controllers on sc8280xp needs an explicit reset, add
> support for this.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 6730349e34f4..39be2e89ce05 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -6,6 +6,7 @@
>
> #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> +#include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/interconnect/qcom,osm-l3.h>
> #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> @@ -2560,6 +2561,8 @@
> interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&rxmacro>;
> clock-names = "iface";
> + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
> + reset-names = "swr_audio_cgcr";
> label = "RX";
>
> qcom,din-ports = <0>;
> @@ -2634,6 +2637,8 @@
> interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&wsamacro>;
> clock-names = "iface";
> + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
> + reset-names = "swr_audio_cgcr";
> label = "WSA";
>
> qcom,din-ports = <2>;
> @@ -2656,6 +2661,14 @@
> status = "disabled";
> };
>
> + lpass_audiocc: clock-controller@32a9000 {
> + compatible = "qcom,sc8280xp-lpassaudiocc";
> + reg = <0 0x032a9000 0 0x1000>;
> + qcom,adsp-pil-mode;
Here and...
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> swr2: soundwire-controller@3330000 {
> compatible = "qcom,soundwire-v1.6.0";
> reg = <0 0x03330000 0 0x2000>;
> @@ -2665,6 +2678,8 @@
>
> clocks = <&txmacro>;
> clock-names = "iface";
> + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>;
> + reset-names = "swr_audio_cgcr";
> label = "TX";
> #sound-dai-cells = <1>;
> #address-cells = <2>;
> @@ -2901,6 +2916,14 @@
> };
> };
>
> + lpasscc: clock-controller@33e0000 {
> + compatible = "qcom,sc8280xp-lpasscc";
> + reg = <0 0x033e0000 0 0x12000>;
> + qcom,adsp-pil-mode;
... here - where do you use these properties? Driver ignores them.
AFAIR, these were only for sc7280 where we supported two variants for audio.
Best regards,
Krzysztof
