On Thu, May 25, 2023 at 01:29:29PM +0100, Srinivas Kandagatla wrote:
> Soundwire controllers on sc8280xp needs an explicit reset, add
> support for this.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 6730349e34f4..39be2e89ce05 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -2901,6 +2916,14 @@
> };
> };
>
> + lpasscc: clock-controller@33e0000 {
> + compatible = "qcom,sc8280xp-lpasscc";
> + reg = <0 0x033e0000 0 0x12000>;
> + qcom,adsp-pil-mode;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> usb_0_qmpphy: phy@88eb000 {
> compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
> reg = <0 0x088eb000 0 0x4000>;
This one needs to be rebased on linux-next as the lpasscc node should go
before the new:
sdc2: mmc@8804000 {
node.
Looks good otherwise:
Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
Johan
