From: Aurelien Jarno <aurelien@xxxxxxxxxxx> Add the '-@' DTC option for the Raspberry Pi devices. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (for instance from the firmware or the bootloader) on these devices. The Rasbperry Pi devices are well known for their GPIO header, that allow various "HATs" or other modules do be connected and this enables users to create out-of-tree device-tree overlays for these modules. Please note that this change does increase the size of the resulting DTB by ~40%. For example, with v6.4-rc1 increase in size is as follows: bcm2711-rpi-400.dtb 27556 -> 38141 bytes bcm2711-rpi-4-b.dtb 27484 -> 38069 bytes bcm2711-rpi-cm4-io.dtb 27373 -> 38076 bytes bcm2835-rpi-a.dtb 12879 -> 18235 bytes bcm2835-rpi-a-plus.dtb 13015 -> 18371 bytes bcm2835-rpi-b.dtb 12997 -> 18377 bytes bcm2835-rpi-b-plus.dtb 13237 -> 18666 bytes bcm2835-rpi-b-rev2.dtb 13085 -> 18514 bytes bcm2835-rpi-cm1-io1.dtb 13109 -> 18528 bytes bcm2835-rpi-zero.dtb 12923 -> 18311 bytes bcm2835-rpi-zero-w.dtb 13449 -> 18889 bytes bcm2836-rpi-2-b.dtb 14500 -> 20252 bytes bcm2837-rpi-3-a-plus.dtb 14930 -> 20713 bytes bcm2837-rpi-3-b.dtb 15107 -> 20979 bytes bcm2837-rpi-3-b-plus.dtb 15463 -> 21443 bytes bcm2837-rpi-cm3-io3.dtb 14429 -> 20098 bytes bcm2837-rpi-zero-2-w.dtb 14781 -> 20524 bytes Signed-off-by: Aurelien Jarno <aurelien@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20220410225940.135744-3-aurelien@xxxxxxxxxxx [ukleinek: rebased to v6.4-rc1] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 59829fc90315..68e89f9289ef 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -85,6 +85,24 @@ dtb-$(CONFIG_SOC_SP7021) += \ sunplus-sp7021-demo-v3.dtb dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb +# Enables support for device-tree overlays +DTC_FLAGS_bcm2835-rpi-b := -@ +DTC_FLAGS_bcm2835-rpi-a := -@ +DTC_FLAGS_bcm2835-rpi-b-rev2 := -@ +DTC_FLAGS_bcm2835-rpi-b-plus := -@ +DTC_FLAGS_bcm2835-rpi-a-plus := -@ +DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@ +DTC_FLAGS_bcm2836-rpi-2-b := -@ +DTC_FLAGS_bcm2837-rpi-3-a-plus := -@ +DTC_FLAGS_bcm2837-rpi-3-b := -@ +DTC_FLAGS_bcm2837-rpi-3-b-plus := -@ +DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@ +DTC_FLAGS_bcm2837-rpi-zero-2-w := -@ +DTC_FLAGS_bcm2711-rpi-400 := -@ +DTC_FLAGS_bcm2711-rpi-4-b := -@ +DTC_FLAGS_bcm2711-rpi-cm4-io := -@ +DTC_FLAGS_bcm2835-rpi-zero := -@ +DTC_FLAGS_bcm2835-rpi-zero-w := -@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ bcm2835-rpi-a.dtb \ -- 2.39.2
