From: Fabio Estevam <festevam@xxxxxxx>
The 'rs485-rts-active-high' property is not a valid property and is not
documented anywhere.
Remove it to fix the following DT schema warning:
serial@21f0000: Unevaluated properties are not allowed ('rs485-rts-active-high' was unexpected)
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
index 5464a52a1f94..ea627638e40c 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
@@ -260,7 +260,6 @@ &uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
- rs485-rts-active-high;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
--
2.34.1
