This patch adds the assigned-clocks and assigned-clock-rates properties
for the LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 2dce8f2ee3ea..adb98a72bdfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -90,6 +90,8 @@ lpuart0: serial@5a060000 {
clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
<&uart0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_0>;
status = "disabled";
};
@@ -100,6 +102,8 @@ lpuart1: serial@5a070000 {
clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
<&uart1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_1>;
status = "disabled";
};
@@ -110,6 +114,8 @@ lpuart2: serial@5a080000 {
clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
<&uart2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_2>;
status = "disabled";
};
@@ -120,6 +126,8 @@ lpuart3: serial@5a090000 {
clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
<&uart3_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_3>;
status = "disabled";
};
--
2.34.1
