Enable nodes required for multipd remoteproc bring up.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V2:
- Corrected syntax like alignmnet and kept nodes in sorted order.
- Added 'firmware-name' property.
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 118 ++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0e04549c69a5..ff0da53ba05f 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -160,6 +160,11 @@
no-map;
};
+ q6_region: wcnss@4ab00000 {
+ reg = <0x0 0x4ab00000 0x0 0x2b00000>;
+ no-map;
+ };
+
smem@4aa00000 {
compatible = "qcom,smem";
reg = <0x0 0x4aa00000 0x0 0x00100000>;
@@ -697,6 +702,95 @@
};
};
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq9574-q6-mpd";
+ reg = <0x0cd00000 0x4040>;
+ firmware-name = "IPQ9574/q6_fw.mdt",
+ "IPQ9574/m3_fw.mdt";
+ interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 0>,
+ <&wcss_smp2p_in 1 0>,
+ <&wcss_smp2p_in 2 0>,
+ <&wcss_smp2p_in 3 0>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+
+ pd-1 {
+ compatible = "qcom,ipq9574-wcss-ahb-mpd";
+ firmware-name = "IPQ9574/q6_fw.mdt";
+ interrupts-extended = <&wcss_smp2p_in 8 0>,
+ <&wcss_smp2p_in 9 0>,
+ <&wcss_smp2p_in 12 0>,
+ <&wcss_smp2p_in 11 0>;
+ interrupt-names = "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+ qcom,smem-states = <&wcss_smp2p_out 8>,
+ <&wcss_smp2p_out 9>,
+ <&wcss_smp2p_out 10>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ };
+
+ pd-2 {
+ compatible = "qcom,ipq5018-wcss-pcie-mpd";
+ interrupts-extended = <&wcss_smp2p_in 16 0>,
+ <&wcss_smp2p_in 17 0>,
+ <&wcss_smp2p_in 20 0>,
+ <&wcss_smp2p_in 19 0>;
+ interrupt-names = "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 16>,
+ <&wcss_smp2p_out 17>,
+ <&wcss_smp2p_out 18>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ status = "disabled";
+ };
+
+ pd-3 {
+ compatible = "qcom,ipq5018-wcss-pcie-mpd";
+ interrupts-extended = <&wcss_smp2p_in 24 0>,
+ <&wcss_smp2p_in 25 0>,
+ <&wcss_smp2p_in 28 0>,
+ <&wcss_smp2p_in 27 0>;
+ interrupt-names = "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 24>,
+ <&wcss_smp2p_out 25>,
+ <&wcss_smp2p_out 26>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ status = "disabled";
+ };
+ };
+
pcie1: pci@10000000 {
compatible = "qcom,pcie-ipq9574";
reg = <0x10000000 0xf1d>,
@@ -966,4 +1060,28 @@
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ wcss: wcss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 9>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
};
--
2.17.1
