Re: [PATCH V2 12/13] arm64: dts: qcom: ipq5018: Add RDP432-c1 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/30/2023 4:36 PM, Krzysztof Kozlowski wrote:
On 22/05/2023 00:28, Manikanta Mylavarapu wrote:
Add initial device tree support for the RDP432-C1 board.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V2:
	- Renamed mp03.5-c1 to RDP432-c1
	- Removed boot-args
	- Resolved dt-binding error's

  arch/arm64/boot/dts/qcom/Makefile             |  1 +
  .../arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts | 49 +++++++++++++++++++
  2 files changed, 50 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 259bd57c6064..bb9164de75b0 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c1.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts
new file mode 100644
index 000000000000..7fe28d9859b0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 RDP432-C1 board device tree source
+ *
+ * Copyright (c) 2023, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C1";
+	compatible = "qcom,ipq5018-rdp432-c1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&q6v5_wcss {
+	pd-2 {
+		firmware-name = "IPQ5018/q6_fw.mdt";

Does not look like correct paths. Please open firmware and look there.
Or open other DTS files and check example. Missing qcom, lowercase,
that's minimum of fixes needed.

Best regards,
Krzysztof


IPQ5018 firmware files are available here
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/ath11k/IPQ5018/hw1.0
I will use 'ath11k/IPQ5018/hw1.0' path.

Thanks & Regards,
Manikanta.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux