Re: [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1

[Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>]

Hi Steffen

On 5/5/23 08:01, Steffen Trumtrar wrote:
> Hi,
>
> this series adds support for the Phytec STM32MP1-based SoM and board.
>
> Phytec itself calls the board "Phycore STM32MP1-3" and has other
> endnumbers. I only have access to the "-3" and that's what this series
> adds.
>
>      Changes since v8:
>        - fix typo: rgmii-sleep-8 -> rgmii-sleep-3
>        - rebase to v6.3
>
>      Changes since v7:
>        - remove unused gpu_reservde memory range
>        - get rid of duplicate ethernet clock assignments
>        - remove secure-status for sdmmc
>      
>      Changes since v6:
>        - rename mdio0->mdio
>      
>      Changes since v5:
>        - cleanup dt_bindings_check warnings
>      
>      Changes since v4:
>        - cleanup usage of "status = okay|disabled"
>        - fix remaining non-generic node names
>        - rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi
>      
>      Changes since v3:
>        - cleanup board-compatible
>        - cleanup aliases
>        - rename nodes according to schema
>        - use interrupt flag
>
>
> Best regards,
> Steffen Trumtrar
>
>
> Steffen Trumtrar (10):
>    ARM: dts: stm32: Add alternate pinmux for ethernet
>    ARM: dts: stm32: Add alternate pinmux for sai2b
>    ARM: dts: stm32: Add new pinmux for sdmmc1_b4
>    ARM: dts: stm32: Add new pinmux for sdmmc2_d47
>    ARM: dts: stm32: Add pinmux for USART1 pins
>    ARM: dts: stm32: Add idle/sleep pinmux for USART3
>    ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a
>    dt-bindings: arm: stm32: Add Phytec STM32MP1 board
>    ARM: dts: stm32: add STM32MP1-based Phytec SoM
>    ARM: dts: stm32: add STM32MP1-based Phytec board
>
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
>   arch/arm/boot/dts/Makefile                    |   3 +-
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      | 231 +++++++
>   .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  60 ++
>   .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 577 ++++++++++++++++++
>   5 files changed, 876 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi

Series applied on stm32-next. Thanks for your efforts!

Regards
Alex