Hi,
this series adds support for the Phytec STM32MP1-based SoM and board.
Phytec itself calls the board "Phycore STM32MP1-3" and has other
endnumbers. I only have access to the "-3" and that's what this series
adds.
Changes since v8:
- fix typo: rgmii-sleep-8 -> rgmii-sleep-3
- rebase to v6.3
Changes since v7:
- remove unused gpu_reservde memory range
- get rid of duplicate ethernet clock assignments
- remove secure-status for sdmmc
Changes since v6:
- rename mdio0->mdio
Changes since v5:
- cleanup dt_bindings_check warnings
Changes since v4:
- cleanup usage of "status = okay|disabled"
- fix remaining non-generic node names
- rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi
Changes since v3:
- cleanup board-compatible
- cleanup aliases
- rename nodes according to schema
- use interrupt flag
Best regards,
Steffen Trumtrar
Steffen Trumtrar (10):
ARM: dts: stm32: Add alternate pinmux for ethernet
ARM: dts: stm32: Add alternate pinmux for sai2b
ARM: dts: stm32: Add new pinmux for sdmmc1_b4
ARM: dts: stm32: Add new pinmux for sdmmc2_d47
ARM: dts: stm32: Add pinmux for USART1 pins
ARM: dts: stm32: Add idle/sleep pinmux for USART3
ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a
dt-bindings: arm: stm32: Add Phytec STM32MP1 board
ARM: dts: stm32: add STM32MP1-based Phytec SoM
ARM: dts: stm32: add STM32MP1-based Phytec board
.../devicetree/bindings/arm/stm32/stm32.yaml | 6 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 231 +++++++
.../dts/stm32mp157c-phycore-stm32mp1-3.dts | 60 ++
.../stm32mp157c-phycore-stm32mp15-som.dtsi | 577 ++++++++++++++++++
5 files changed, 876 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
--
2.39.1
