On Thu, 11 May 2023 16:10:20 +0200, Daniel Golle wrote: > The boottrap is used to read implementation details from the SoC, such > as the polarity of LED pins. Add bindings for it as we are going to use > it for the LEDs connected to MediaTek built-in 1GE PHYs. > > Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> > --- > .../arm/mediatek/mediatek,boottrap.yaml | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.example.dtb: boottrap@1001f6f0: $nodename:0: 'boottrap' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.example.dtb: boottrap@1001f6f0: reg: [[0, 268564208], [0, 32]] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.yaml See https://patchwork.ozlabs.org/patch/1780124 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
