Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet PHYs which require calibration data from the SoC's efuse. Despite the similar design the driver doesn't share any code with the existing mediatek-ge.c, so add support for these PHYs by introducing a new driver for only MediaTek's ARM64 SoCs. As the PHYs integrated in the MT7988 SoC require reading the polarity of the LEDs from the SoCs's boottrap also add dt-binding for that. All LEDs are for now setup with default values, a follow up patch which allows custom LED setups will be sent after the PHY LED framework is more in shape. Changes since v3: * fix spelling and reverse xmas tree * add dt-binding for mediatek,boottrap Changes since v2: * remove everything related to PHY LEDs for now, LED support will be cleaned up and submitted once PHY LED framework is more ready Changes since v1: * split-off SoC-specific driver from mediatek-ge.c as requested * address comments made by Heiner Kallweit * add pinctrl handling for PHY LED * remove calibration details not needed in production hardware Daniel Golle (2): dt-bindings: arm: mediatek: add mediatek,boottrap binding net: phy: add driver for MediaTek SoC built-in GE PHYs .../arm/mediatek/mediatek,boottrap.yaml | 37 + MAINTAINERS | 9 + drivers/net/phy/Kconfig | 12 + drivers/net/phy/Makefile | 1 + drivers/net/phy/mediatek-ge-soc.c | 1264 +++++++++++++++++ drivers/net/phy/mediatek-ge.c | 3 +- 6 files changed, 1325 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.yaml create mode 100644 drivers/net/phy/mediatek-ge-soc.c base-commit: 285b2a46953cecea207c53f7c6a7a76c9bbab303 -- 2.40.0
